Zhengzhou Fusmar Machinery is a professional feed mixing machine manufacturer, this article will introduce U-type horizontal mixer in detail.
Why Choose A U-Type Horizontal Mixer
The U-type horizontal mixer consists of a U-type housing, a ribbon agitation into the blade and a transmission component. The ribbon blade is a double-layer inner and outer structure, the material from the two sides to the center, and the inner layer spiral convey the material from the center to the two sides to form a convection mixing.
The feed mixing machine has good effects on the mixing of viscous or cohesive powders and granules and the mixing of liquid and paste materials in the powder. The cylinder cover can make into a fully open door to facilitate the equipment to clean and replace.
Feed Mixing Machine Introduce
The feed mixing machine is stirred a dry, powdery material and evenly mixed. During the mixing, two rotors moving in opposite directions moved the material, and the composite motion carried out. The material along the inner wall of the machine slot for two clockwise rotations. The axis rotated the materials, and the axial direction pushed from the inside to both sides. The outer spiral drives the material close to the wall to rotate, and the axial direction pushed from both sides to the inside, thus causing convection circulation and shearing in the material cylinder. The mixture mixed and the material is quickly and uniformly mixed in a short time.
Main Structure Of The Feed Mixing Machine
Mixer parts mainly made of wear-resistant alloy materials, including high-speed mixing scrapers, wear-resistant linings, mixing arms, stir bars and so on.
The moving parts of the mechanical agitator also shear the liquid when it rotated. The liquid also subjected to shearing action when flowing through the wall and various fixing members installed in the container. These shearing effects will cause many eddy current diffusion.
How Does The U-type Horizontal Mixer Work
The machine consists of two parts: feeding and mixing.
Feeding part: Entering from the feeding hopper, the material lifted into the mixer through the spiral blade to enter the mixing drum for mixing.
Mixing part: When the material enters the mixing drum for round-trip staggering movement, the mixing effect is good.
Features Of The Product
- U-shaped barrel structure, stable operation, even mixing, no dead angle, clean discharge, and wide application.
- Staggered round-trip mixing with inner and outer double-layer ribbons for fast mixing and high uniformity
- The bearings are at both ends of the mixer, the material is not easy to enter, and the maintenance rate is low.
- The screw conveyor is convenient to feed, the feeding port is flush with the ground. And the feeding is labor-saving and convenient.
Choosing a suitable horizontal feed mixer and using it properly will significantly improve the quality of the mix. It will soon reflect a benign effect in the production process. If you can further master the technology of self-mixing, you can also greatly reduce the cost of materials, thereby increasing profits.