Many users face the problems of low output, high wear, and high cost when using the feed pellet mill for the first time. No matter what the feed pellet machine equipment, we all hope that a higher output and the better. Zhengzhou Fusmar Machinery is a professional feed pellet machine manufacturer. After years of customer feedback and practical experience, summarized the following methods to improve the output of feed making machine.

Control The Content Of Crude Fiber Materials

Crude fiber is a very important factor in the pelletization process. Too much content has poor cohesiveness, it is difficult to press-form. The content is too small, which is not conducive to mold. Generally, control is best at around 5%. If you want to know the exact value, please contact us. We give the calculation result according to your specific situation.

feed pellet machine

Strict Control Of Moisture

For feed pellets, the moisture of the material must strictly control. This is the premise that the material pressed into pellets. If the moisture is too high, the pellets will loose. In fact, the biggest factor in the formation of feed pellets is water. If moisture control is good, the yield will naturally high. Secondly, the compression ratio problem, a pair of compression can save a lot of things, whether in molding or production. There are great advantages to it.

Adjust The Formula

According to the characteristics of the material adjusted the formula andmoisture. Some customers have low yield and wear in the use of the feed pellet machine due to the problem of the formula. For example, the processed grass powder content of the processed rabbit can not exceed 50%, and excessive grass powder is difficult to press and form. Secondly, the moisture content of the mixture should keep at around 20%.

feed making machine

Feeding Method

The feeding method is often a problem that is easy to ignore. Many new users are feeding in a simple way, and can’t feed evenly. When the feed making machine feeding unstable, the machine is vulnerable. It is best to clean up the pellet making equipment when it used. The advantage of this is: to avoid the hole in the feed inside, do not need to cast holes in the next boot, reducing unnecessary wear and tear.

It can see that these points are all common sense, but it is these standards that guarantee the high-yield operation of the feed pellet mill. And do not seek any high-tech, but seek to make no mistakes under the existing conditions. In line with the standard, the pellet making equipment will operate normally and the output will not bad.

Of course, if you want a larger output of equipment, personally recommend that the feed pellet machine arranged side by side. So that not only the output will increase, but even if one fails, other equipment can still produce normally. Which will not have much impact on the output.

feed pellet machine

Choosing A Suitable Feed Pellet Machine

Choosing a suitable feed making machine and using it properly will significantly improve the quality of the pellets. It will soon reflect a benign effect in the production process. If you can further master the technology of making pellets, you can also greatly reduce the cost of materials, thereby increasing the profits.

Zhengzhou Fusmar Machinery specializes in the production of feed pellet machine, feed hammer mill, feed mixing machine, feed cooling machine, feed packing machine and other feed machinery.